Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Inagaki, Yoshiyuki; Sakaba, Nariaki; Tanaka, Nobuyuki; Nomura, Mikihiro*; Sawada, Shinichi*; Yamaki, Tetsuya*
Nihon Kaisui Gakkai-Shi, 73(4), p.194 - 202, 2019/08
The thermochemical IS process is a promising hydrogen production method which can produce hydrogen in a large amount and stably with high efficiency by thermal splitting of water. Research and development on chemical reaction technology with membranes was conducted for the purpose of improving the efficiency of IS process and application of solar heat. The basic technology of ceramic membranes applied to decomposition reactions of hydrogen iodine and sulfuric acid was developed, and it is expected that the conversion rate on decomposition in each reaction can be remarkably improved. The basic technology of a cation exchange membrane applied to Bunsen reaction was developed with radiation-induced grafting technique, it is expected that the amount of iodine can be reduced to about one-fifth compared to the conventional method. These achievements are important technologies for practical use of the IS process.
Sawada, Shinichi*; Yasukawa, Masahiro*; Koshikawa, Hiroshi*; Kitamura, Akane; Higa, Mitsuru*; Yamaki, Tetsuya*
Nihon Kaisui Gakkai-Shi, 73(4), p.208 - 216, 2019/08
For applications to saline water concentration by electrodialysis, we prepared nano-structure-controlled cation and anion exchange membranes (CEMs and AEMs) by a so-called ion-track grafting technique. This new technique involves irradiation of a polymer substrate with an MeV-GeV heavy-ion beam to form the nano-sized cylindrical ion tracks and the graft polymerization only into the ion tracks for the creation of one-dimensional transport pathways. A 25-
m-thick poly(ethylene-co-tetrafluoroethylene) film was irradiated with 560 MeV 
Xe or 310 MeV 
Kr. The irradiated films were immersed in grafting solutions of ethyl p-styrenesulfonate (EtSS) and chloromethylstyrene (CMS), and then subjected to the hydrolysis of EtSS units and quaternization of CMS units to prepare CEMs and AEMs, respectively. These CEMs and AEMs showed lower resistance than the commercially-available membranes even at the very low water uptake. This would be due to the signifcantly-effcient transport of ions through the unique one-dimensional highly-connected transport pathways. In the saline water concentration experiment, a pair of our CEM and a commercial AEM or vice versa led to a higher salt concentration in the concentration chamber than did a pair of the commercial membranes. This result demonstrated great applicability of our ion-track-grafted CEMs and AEMs for saline water concentration.
Yamaki, Tetsuya*; Kitamura, Akane; Sawada, Shinichi*; Koshikawa, Hiroshi*
Nihon Kaisui Gakkai-Shi, 72(2), p.62 - 74, 2018/04
This review paper is devoted to two topics, i.e., fluoropolymer-based porous and ion-exchange membranes, both of which include the creation of nanostructure-controlled functional membranes with high-energy ion beams. Latent tracks of the MeV-GeV heavy ions in a polymer foil can sometimes be chemically etched out to form a membrane with micro- and nano-sized through-pores, the so-called ion-track membrane. Our focus is on ion-track membranes of poly (vinylidene fluoride) (PVDF) and cation- and anion-exchange membranes (CEMs and AEMs, respectively).
Someya, Takaaki*; Asai, Shiho; Fujiwara, Kunio*; Sugo, Takanobu*; Umeno, Daisuke*; Saito, Kyoichi*
Nihon Kaisui Gakkai-Shi, 69(1), p.42 - 48, 2015/02
A large amount of seriously contaminated sea water with radioactive Cs has been reserved in semi-enclosed coastal sea area which is separated by silt fences and embankments. Insoluble cobalt ferrocyanide (Co-FC) microparticles-impregnated fiber was developed for removing Cs from the contaminated sea water. The resultant Co-FC-impregnated fiber was immersed in either nonradioactive or radioactive Cs solution. The adsorption isotherm well correlated with a Langmuir-type equation. In addition, mass-transfer capacity coefficients were determined by fitting the experimental data of the rate of Cs adsorption onto the Co-FC-impregnated fiber to theoretical adsorption curves based on the Cs concentration difference between the bulk and the interface in seawater as a driving force of the overall adsorption rate. Decontamination factors as functions of fiber weight and the contact time required for the removal of cesium ions from the contaminated seawater in a closed area were estimated.
Miyazawa, Tadashi*; Asari, Yuki*; Miyoshi, Kazuyoshi*; Umeno, Daisuke*; Saito, Kyoichi*; Nagatani, Takeshi*; Yoshikawa, Naohito*; Motokawa, Ryuhei; Koizumi, Satoshi*
Nihon Kaisui Gakkai-Shi, 64(6), p.360 - 365, 2010/12
Seko, Noriaki
Nihon Kaisui Gakkai-Shi, 63(4), p.221 - 225, 2009/08
Braid adsorbent having functional group of amidoxime is a promising material for the recovery of uranium dissolved in the seawater. This long braid adsorbent was made by polyethylene multi-fibers in which amidoxime groups were introduced by radiation-induced graft polymerization and subsequent chemical treatment. The braid adsorbent obtained was moored at the offing of Okinawa Island. The average U adsorption of the adsorbent became 1.5 g-U/kg-adsorbent for 30 d soaking. The mooring system for braid adsorbent has possibility which reduced the cost for the recovery of uranium from seawater. Annual product of 1200 tons of uranium needs 134 km
of mooring area. In addition, there is 6000 km and more of suitable sea area for the collection of the uranium in the regions from Okinawa Islands to Tosa Bay in Japan.
Seko, Noriaki; Kasai, Noboru; Shimizu, Takao*; Tamada, Masao
Nihon Kaisui Gakkai-Shi, 59(5), p.316 - 319, 2005/10
Braid adsorbent having functional group of amidoxime is a promising material for the recovery of uranium dissolved in the seawater. This long braid adsorbent was made by polyethylene multi-fibers in which amidoxime groups were introduced by radiation-induced graft polymerization and subsequent chemical treatment. The braid adsorbent obtained was moored at the offing of Okinawa Island. The average U adsorption of the adsorbent became 1.5 g-U/kg-adsorbent for 30 d soaking. The mooring system for braid adsorbent has possibility which reduced the cost for the recovery of uranium from seawater. Annual product of 1200 tons of uranium needs 134 km of mooring area. In addition, there is 6000 km and more of suitable sea area for the collection of the uranium in the regions from Okinawa Islands to Tosa Bay in Japan.
Katakai, Akio; Seko, Noriaki; *; *; Sugo, Takanobu
Nihon Kaisui Gakkai-Shi, 53(3), p.180 - 184, 1999/06
no abstracts in English
Sugo, Takanobu
Nihon Kaisui Gakkai-Shi, 47(4), p.235 - 241, 1993/00
no abstracts in English
